Concrete Grinders and Scarifiers		  
 
$/Day $/Week $/Month
8" Scarifier - gasoline or 220 volt * 56 168 504
10" Scarifier - gasoline or propane 153 459 1,377
  Scarifiers require one of the following cutting attachments: 
  Steel Teeth Purchase
  Tungsten Teeth (long life) 140 420 1,260
Dyma Grinder - high-speed, 1 head - 220 volt      
  Gasoline or Propane (requires 10" diamond ring) 122 366 1,098
  10" Diameter Ring - $10.00/thousandth or min. 180 540 1,620
Concrete Grinder      
  1 Head, Slow Speed - gas, 220 volt or propane (requires one set of any of the following cutting attachments) 41 123 369
  2 Head, Slow Speed - gas, 220 volt or propane (requires two sets of any of the following cutting attachments) 61 183 549
    Rubbing Bricks (light) Purchase
  Carb-A-Tach (medium), 3/set 30 90 270
  Diam-A-Serts (heavy), 3/set - $6.00/thousandth or min. 50 150 450
  Scrape-A-Tach (glue, paint), 3/set 45 135 405
  120 lb. Weight Kit 25 75 225
 7" Edge Grinder (requires 7" diamond disc) 77 231 693
  7" Diamond Disc 30 90 270
Vacuum For Concrete, 110 volt, 100 CFM 51 153 459
Vacuum For Concrete, 110 volt, 180 CFM 71 231 693
Vacuum For Concrete, 9 hp gasoline, 150 CFM w/scrubber 125 375 1,125
(NOTE: Gas engine scrubbers also available)

THE EDCO SURFACE - PREPARATION GUIDE
Machine Accessory Tasks Can Be
Used On		 Useable Range Power Options Vacuum Port
Grinders

Dyma-Serts
30-120 grit

 

 Remove paints, sealers, mastics, high spots rain marks, trowel marks, rough surfaces, uneven joints. Longer lasting and faster grinding! Concrete Terrazzo
Epoxy
Mortars
Coatings
Mastics 		Up to 1/16"
(2 mm)		 Electric
Gasoline
Proprane 		Yes
Stones
10-400 grit		 Lightly grind rough or uneven spots. Concrete Terrazzo Up to 1/16"
(2 mm)		 Electric
Gasoline
Proprane 		Yes
Dyma Grinder 10"
Diamond Discs		 Level joints or bridge decks. High-speed grinding. Concrete Up to 1/4"
(6 mm)		 Electric
Gasoline
Propane 		Yes
Scarifiers

Tungsten Carbide cutters

 


Steel
Cutters

 


Diamond Blades

Remove coatings, concrete and asphalt at high production rates. Scarify old and to allow drainage. Install recessed materials. Longer lasting and more aggressive!

Clean surfaces. Remove rubberized membranes. Lightly texture. Perform the same tasks as tungsten carbide cutters: shorter life.

Groove concrete and asphalt. Create nonslip ramps. Cut channels in floors or roads.

Concrete
Asphalt
Steel
Coatings

 

Concrete
Asphalt
Steel
Coatings



Concrete
Asphalt

Up to 3/16"
(5 mm)*

 


Up to 1/16"
(2 mm)*



Up to 5/8"
(16 mm)*

Electric
Gasoline
Propane

 


 

 

 Yes
*Useable range is based on a single machine pass. Multiple passes can be made to achieve greater working depths.

=FABCO RENTS
=Lincoln Contractors Supply